Aquadrive Antivibration System

Isolation of the engine from the hull structure. Cabin & cockpit noise and vibration are greatly reduced by 50% or more.

grp components
  • CVB05.10 Aquadrive Moduline

    B10

    Custom-length CV 05 driveshaft is available in lengths from 150 mm (from 240 mm with tubeshaft design). Maximum length depends on shaft rpm.

  • CVB10.10 Aquadrive Moduline

    B10

    Custom-length CV 10 driveshaft is available in lengths from 150 mm (from 240 mm with tubeshaft design). Maximum length depends on shaft rpm.

  • CVB15.10 Aquadrive Moduline

    B10

    Custom-length CV 15 driveshaft is available in lengths from 170mm (from 270mm with tubeshaft design). Maximum length depends on shaft rpm

  • CVB21.10 Aquadrive Moduline

    B10

    Custom-length CV 21 driveshaft is available in lengths from 210mm (from 280mm with tubeshaft design). Maximum length depends on shaft rpm.

  • CVB21.20 Aquadrive Moduline

    B20

    Custom-length CV 21 driveshaft is available in lengths from 210mm (from 280mm with tubeshaft design). Maximum length depends on shaft rpm.

  • CVB30.20 Aquadrive Moduline

    B20

    Custom-length CV 30 driveshaft is available in lengths from 245mm (from 340mm with tubeshaft design). Maximum length depends on shaft rpm.

  • HDL60.700 Aquadrive Heavy Duty

    Custom-length CV 60 driveshaft is available in lengths from 370mm (from 700mm with tubeshaft design). Maximum length depends on shaft rpm.

  • CVB32.30 Aquadrive Moduline

    B30

    Custom-length CV 32 driveshaft is available in lengths from 300mm (from 420mm with tubeshaft design). Maximum length depends on shaft rpm.

  • CVB42.30 Aquadrive Moduline

    B30

    Custom-length CV 42 driveshaft is available in lengths from 270mm (from 430mm with tubeshaft design). Maximum length depends on shaft rpm.

  • HDL48.690 Aquadrive Heavy Duty

    Flanged Option Available

    Custom-length CV 48 driveshaft is available in lengths from 320mm (from 420mm with tubeshaft design). Maximum length depends on shaft rpm.

  • HDL60.700 Aquadrive Heavy Duty HT

    High Tensile Steel

    Custom-length CV 60 driveshaft is available in lengths from 370mm (from 700mm with tubeshaft design). Maximum length depends on shaft rpm.

  • CVB 42.680 Aquadrive Heavy Duty HDL

    Custom-length CV 42 driveshaft is available in lengths from 270mm (from 430mm with tubeshaft design). Maximum length depends on shaft rpm.

  • CVB 42.680 Aquadrive Heavy Duty HDL

    Flanged

    Custom-length CV 42 driveshaft is available in lengths from 270mm (from 430mm with tubeshaft design). Maximum length depends on shaft rpm.

  • HDL60.780 Aquadrive Heavy Duty

    Custom-length CV 60 driveshaft is available in lengths from 370mm (from 700mm with tubeshaft design). Maximum length depends on shaft rpm.

Aquadrive System Engine Mounts

It is essential to select the correct rubber grade and mount for the engine or generator in question. For reference, the chart above shows the level of deflection (or squash) that will occur on each model of mount for a given loading.

In general you should aim for 3mm on the 50210, 4mm on the 50220, 5mm on the 50230 and 6mm on the 50240. The numbering system is simple: A 50223 mount is the 50220 model with number three rubber hardness and so on. Some engines, particularly those with less than four cylinders, require particular care and your distributor will help with these.

Engine Mounts Deflection Chart
    50210 Series Engine Mounts

    Complete with Stud and Any Stiffness Grade

    Weight: 0.5kg

    50220 Series Engine Mounts

    Complete with Stud and Any Stiffness Grade

    Weight: 1.1kg

    50230 Series Engine Mounts

    Complete with Stud and Any Stiffness Grade

    Weight: 2.6kg

    50240 Series Engine Mounts

    Complete with Stud and Any Stiffness Grade

    Weight: 9.5kg