RANGE OVERVIEW

MDE Exhaust Hose

Our exhaust hose is stocked in sizes from 40mm (1.5") right through to 300mm (12") and is generally Lloyds approved. Almost all our hose passes Lloyds stringent tests on temperature and on ozone deterioration, and will give many years service.

Our hose offers very tight corners, but the wall thickness remains heavy enough to give security. The specific bend radius available for each diameter, together with the sizes available and their weights, is shown in our price list. Only real T Bar exhaust clamps should be used when fitting this hose.

Silicon Exhaust Hose

For really high temperatures Halyard can provide silicon exhaust hose, in two grades, handling temperatures of 170°C and 270°C.

High Temperature Exhaust Hose

Our hose is also available with a high temperature liner, allowing the hose to handle temperatures reaching 160°C.

Flexible EPDM Rubber Elbows

Get you round tight corners in the exhaust system, with less back pressure than a GRP fabricated bend. The standard units take up to 120°C, and the blue units up to 160°C.

Silicon Bellows

Flexible exhaust bellows are important to isolate engine vibration from the exhaust system, particularly where a silencer or rigid section is close to the engine. Our bellows cover a wide range of sizes up to 300mm (12") exhaust systems, and they will take temperatures up to 170ºC.

Exhaust Hose Clamps

Exhaust hose should be fitted using tough "T" Bar clamps. Halyard stocks clamps to suit hose up to 300mm (12"), both in stainless steel and in zinc passivated steel.